|
DUAL DS12 12" INCH 525 WATT SINGLE VOICE SUB WOOFER
|
|
Metra RA-12W 12" Sub Woofer raptor Series
|
|
|
|
|
|
|
DUAL DS12 12" INCH 525 WATT SINGLE VOICE SUB WOOFER
|
Metra RA-12W 12" Sub Woofer raptor Series
|
|
|
|
Pioneer TSW302R 800 Watt (Max) 12-Inch Subwoofer
|
|
CLARION SW1251 12" 4 OHM SUB WOOFER
|
|
|
|
|
|
|
Pioneer TSW302R 800 Watt (Max) 12-Inch Subwoofer
|
CLARION SW1251 12" 4 OHM SUB WOOFER
|
|
|
|
Powerbass S-124 Diamond Audio 12" Shallow-Mount Subwoofer Carbon Fiber Cone
|
|
KENWOOD KFC-W3011 12" SVC 1200W SUB WOOFER
|
|
|
|
|
|
|
Powerbass S-124 Diamond Audio 12" Shallow-Mount Subwoofer Carbon Fiber Cone
|
KENWOOD KFC-W3011 12" SVC 1200W SUB WOOFER
|
|
|
|
Pioneer TSW307D2 12-Inch Subwoofer with 1200 Watts Max Power
|
|
Pioneer TSW307D4 Subwoofer with 1200 Watts maximum Power 12"
|
|
|
|
|
|
|
Pioneer TSW307D2 12-Inch Subwoofer with 1200 Watts Max Power
|
Pioneer TSW307D4 Subwoofer with 1200 Watts maximum Power 12"
|
|
|
|
Soundstream SW-12SE Subwoofer Dual 4 OHM 250 RMS 12"
|
|
JBL GT5-12 12" (300mm) Single-Voice-Coil Subwoofer
|
|
|
|
|
|
|
Soundstream SW-12SE Subwoofer Dual 4 OHM 250 RMS 12"
|
GT5-12 12" (300mm) Single-Voice-Coil Subwoofer
|
|
|
|
Rockford Fosgate P1S412 12 inch P1 Series Sub Woofer
|
|
Infinity 1260W 12" Single Voice Coil Subwoofer With Stacked 40oz Magnets
|
|
|
|
|
|
|
Rockford Fosgate P1S412 12 inch P1 Series Sub Woofer
|
Infinity 1260W 12" Single Voice Coil Subwoofer With Stacked 40oz Magnets
|
|
|
|
Kenwood KFC-W3012 KFC Series 12" 4-ohm subwoofer
|
|
Infinity 1250w / 1252w Reference Series 12" 4 Ohm Single Voice Coil Subwoofer single or dual voice coil Sub
|
|
|
|
|
|
|
Kenwood KFC-W3012 KFC Series 12" 4-ohm subwoofer
|
Infinity 1250w / 1252w Reference Series 12" 4 Ohm Single Voice Coil Subwoofer single or dual voice coil Sub
|
|
|
|
Soundstream SM-124 12" Mid Woofer 450 Max Watts
|
|
Hypnotic HK12D 12 inch SubWoofer 4 Ohm DVC Sub
|
|
|
|
|
|
|
Soundstream SM-124 12" Mid Woofer 450 Max Watts
|
Hypnotic HK12D 12 inch SubWoofer 4 Ohm DVC Sub
|
|
|
|
Infinity 1262W 12" Dual Voice Coil Subwoofer With A Pair of 40oz Magnets
|
|
Quantum QS12S4 12 Inch SubWoofer SVC
|
|
|
|
|
|
|
Infinity 1262W 12" Dual Voice Coil Subwoofer With A Pair of 40oz Magnets
|
Quantum QS12S4 12 Inch SubWoofer SVC
|
|
|
|
Kicker 07C12 Comp 12" inch Subwoofer
|
|
Hypnotic Audio HT12 - HT12D 12 inch Sub Woofer SVC - DVC
|
|
|
|
|
|
Even if your pockets don't overflow with dough, KICKER can still provide the best bass for the buck.
The Comp Subwoofer represents the best balance between high value and high performance available in today's round-subwoofer market. It's equipped with all the proven KICKER engineering that you expect, and it's got a new look that leaves the impression that it has a mean streak.
Besides its wicked good looks, the Comp comes with serious muscle, including double stitching on the surround, coil-cooling perimeter venting, and flex-killing ISD™ (Inverted Structural Dome). The Comp is versatile too, performing in free-air applications as well as in vented or sealed boxes. If all this wasn't enough, the Comp still leaves you with enough cash left over to throw down on a powerful KICKER amplifier to pump all the performance from your sub.
The rigid cone's back bracing completely eliminates distortion, allowing the best bass to be delivered. The larger voice coils, coil wire with intense heat tolerance, highly engineered top plates, and immense power handling still remain, providing the most and best bass from any subwoofer in its class. And here's another first from KICKER – Spiralead™ tinsel-lead technology for even more strength and durability.
With prices going up on everything else around, the Comp makes perfect sense for any factory upgrade. With the ribbed surround, yellow stitching, nickel-plated push terminals, and a basket design that includes a stylish logo trim ring, the Comp looks as good as it sounds and lets you know who's in the house.
Four sizes are available, ranging from an 8-inch to an extremely affordable and loud 15-inch.
|
Hypnotic Audio HT12 - HT12D 12 inch Sub Woofer SVC - DVC
|
|
|
|
Sony XS-EL121W Loaded Single 12 inch Sub Woofer Box Combo
|
|
Quantum QPW12D4 12 Inch Subwoofer DVC
|
|
|
|
|
|
|
Sony XS-EL121W Loaded Single 12 inch Sub Woofer Box Combo
|
Quantum QPW12D4 12 Inch Subwoofer DVC
|
|
|
|
Quantum QPW12S4 12 Inch SubWoofer SVC
|
|
Powerbass L-124D 12" Subwoofer
|
|
|
|
|
|
|
Quantum QPW12S4 12 Inch SubWoofer SVC
|
Powerbass L-124D 12" Subwoofer
|
|
|
|
Quantum QS12D4 12 Inch SubWoofer DVC
|
|
CLARION SRW1285 12h DUAL VOICE COIL SUBWOOFER
|
|
|
|
|
|
|
Quantum QS12D4 12 Inch SubWoofer DVC
|
CLARION SRW1285 12h DUAL VOICE COIL SUBWOOFER
|
|
|
|
JBL GTO1214 300mm (12") Die-Cast Single-Voice-Coil Subwoofer
|
|
JBL GTO1214D 12" Die-Cast Dual Voice Coil Subwoofer
|
|
|
|
|
|
|
GTO1214 300mm (12") Die-Cast Single-Voice-Coil Subwoofer
|
GTO1214D 12" Die-Cast Dual Voice Coil Subwoofer
|
|
|
|
Soundstream PW12s - PW-12S 12" Inch Sub Woofer
|
|
Infinity 124.7W Kappa 12" Subwoofer 2 or 8 ohms
|
|
|
|
|
|
|
Soundstream PW12s - PW-12S 12" Inch Sub Woofer
|
Infinity 124.7W Kappa 12" Subwoofer 2 or 8 ohms
|
|
|
|
KENWOOD KFC-W3514DVC 12" 1500W SUB WOOFER
|
|
Hypnotic HV12D 12 inch DVC Sub Woofer
|
|
|
|
|
|
|
KENWOOD KFC-W3514DVC 12" 1500W SUB WOOFER
|
Hypnotic HV12D 12 inch DVC Sub Woofer
|
|
|
|
Quantum QCSW12D2 QCSW12D4 12 Inch SubWoofer DVC
|
|
Powerbass L-12D 12" Subwoofer Power Handling Capacity (Peak): 800W
|
|
|
|
|
|
|
Quantum QCSW12D2 QCSW12D4 12 Inch SubWoofer DVC
|
Powerbass L-12D 12" Subwoofer Power Handling Capacity (Peak): 800W
|
|
|
|
Pioneer TSSW301 12-Inch 1,000 Watt Shallow Subwoofer
|
|
Memphis MC124D DVC 12 INCH M-Class Sub Woofers NIB
|
|
|
|
|
|
|
Pioneer TSSW301 12-Inch 1,000 Watt Shallow Subwoofer
|
Memphis MC124D DVC 12" M-Class Sub Woofers NIB
|
|
|
|
DIAMOND AUDIO D312D4 12 INCH DVC SUB WOOFER
|
|
Kicker 07CVR12 CompVR 12" inch Subwoofer
|
|
|
|
|
|
|
DIAMOND AUDIO D312D4 12 INCH DVC SUB WOOFER
|
It's a tough job but somebody's got to do it. Kicker builds the CompVR round subwoofers to endure the the harsh demands of producing big bass. Each sub houses an injected-molded polypropylene cone and Santoprene™ rubber surround in a high-strength steel basket with plenty of interior venting. Kicker's SoloKon™ cone design looks fantastic while it protects against flexing that can wreck your sub and your sound.
The 07CVR124 12" sub boasts dual 4-ohm voice coils that can manage a heavy power onslaught, while adding more options for wiring up your system. UniPlate construction molds parts of the sub's motor structure together as a single unit to optimize heat transfer, improve accuracy, and extend cone excursion.
Kicker CompVR subs can be used for marine applications, so make some waves with these stellar subwoofers.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation.
Features
Dual Voice Coils: For increased system flexibility, the woofer has two 4 ohm voice coils. When the voice coils are wired in parallel, the woofer presents a 2 ohm load. When the voice coils are wired in series, the woofer presents an 8 ohm load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4 ohm load.
Cone Materials: The cone was developed using Kicker's SoloKon technology. The ultra high performance injection molded polypropylene cone remains rigid and minimizes cone flex, lowering harmonic distortion. Distortion in the cone is further reduced with new back bracing.
Surround: The optimized ribbed Santoprene surround allows extended cone excursion for additional bass output and higher SPL. The surround is double-stitched to the cone to add a mechanical fastener to the chemical adhesives. This prevents the cone and surround from separating in the harshest conditions.
Enhanced BAM (Basket And Motor) Assembly: The high-strength steel basket features a low-profile open design, and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting in the BAM relieves pressure from under the spider, supports a linear excursion, and helps dissipate heat from the voice coil and motor structure.
UniPlate Construction: The woofer features a one-piece UniPlate construction with a vented hyper-extended pole piece and backplate. This unique design provides the following benefits:
* Optimizes heat transfer efficiency for cooler operation and maximum power handling ability
* Eliminates erratic magnetic flux from the voice coil gap
* Releases pressure under the suspension for uniform cone movement and responsive low bass
* Prevents the voice coil from bottoming out and corresponding damage
Tinsel Leads: The woofer features sleeved high-power tinsel lead wires to resist breakage and power-robbing resistance losses. The lead wires are terminated with polymer-based strain relieving mechanical fasteners.
Speaker Terminals: The spring loaded, nickel-plated terminals provide solid connections for speaker wire up to 8 gauge. Single banana plugs and pin connectors will also fit.
Break-in Period: Due to the complex nature of Kicker Comp VR speakers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation.
Marine Ready: This woofer is made with a powder coated, weather resistant basket and stainless steel hardware, so it can be used in marine and mobile applications.
Enclosure Compatibility
Power Handling: The power handling specifications differ according to the type and size of the enclosure. The power handling specifications assume that both voice coils are in use. Note: Both voice coils in a dual voice coil speaker should always be connected.
Recommended Sealed Box Volume:
* Compact (minimum enclosure volume): 1 cu/ft; the woofer can handle up to 400 watts RMS (200 watts per voice coil)
* SQ (maximum enclosure volume): 4.6 cu/ft; the woofer can handle up to 300 watts RMS (150 watts per voice coil)
Recommended Vented Box Volume:
* Compact: 1.75 cu/ft; 2.5" x 12.5" port opening; 20" port depth; the woofer can handle up to 300 watts RMS (150 watts per voice coil)
* SPL/Deep Bass: 2.25 cu/ft; 3" x 12.5" port opening; 20.5" port depth; the woofer can handle up to 300 watts RMS (150 watts per voice coil)
Note: The power handling specifications listed with the vented enclosure recommendations apply only when a 25Hz, 24dB/octave subsonic filter (sold separately) is used with this woofer. If a subsonic filter is not used, power handling may decrease, excessive port noise can occur, and the life of the woofer may be shortened.
# 12" subwoofer with dual 4-ohm voice coils
# injection-molded polypropylene cone
# ribbed Santoprene rubber surround
# suitable for marine use
# power handling: 50-400 watts RMS (200 watts per coil)
# 800 watts peak power handling
# frequency response: 25-500 Hz
# sensitivity: 86.7 dB
# top-mount depth: 6-1/4"
# sealed box volume: 1.0-4.6 cu. ft.
# ported box volume: 1.75-2.25 cu. ft.
# Recommended Q-Logic Box Type: 1, 2, 3
|
|
|
|
Kicker 07CVT12 CompVT 12" inch Subwoofer
|
|
Kenwood Excelon KFC-XW1200F Shallow-mount 12" 4-ohm subwoofer
|
|
|
|
|
|
If you've ever wanted a sub with outstanding power handling that can fit in your vehicle's tight spots, check out Kicker's CompVT line. These extra-shallow bass bangers require less room than ordinary subs without sacrificing sound quality or bass impact.
Kicker's 07CVT122 12" sub handles up to a hefty 400 watts RMS, while requiring less than 4-1/2 inches of mounting depth. The rigid, injection-molded polypropylene cone throws down some serious thump, while the ribbed Santoprene™ rubber surround helps control cone movement for accurate response. A unique design lets you mount the CompVT sub directly against the back wall of an enclosure, while perimeter venting on the stamped-steel basket keeps the sub cool under pressure.
This 12" sub's 2-ohm impedance gets more power out of your mono amplifier. It'll work in a sealed or vented enclosure, and its slim profile gives you more installation options in your car or truck. Pick up a pre-made enclosure or get creative with your own custom box — you'll find Kicker CompVT subs deliver the trademark Kicker bass experience in a slimmer, yet full-bodied package.
Note: Make sure that your amp is compatible with this 2-ohm sub. Most car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation. Most mono amps are stable down to 2 ohms.
Features
Cone: The cone is a modified spoke cone design so the CVT series woofers are much more shallow than their standard CVR counterparts. The CVR12 is almost 2" deeper than the CVT12. The ultra high performance injection molded polypropylene cone remains rigid and minimizes cone flex, lowering harmonic distortion. Distortion in the cone is further reduced with 360° back bracing.
Surround: The optimized ribbed Santoprene surround allows extended cone excursion for additional bass output and higher SPL. The surround is stitched to the cone to add a mechanical fastener to the chemical adhesives. This prevents the cone and surround from separating in the harshest conditions.
Basket and Motor Assembly: The high-strength steel basket features a low-profile open design, and provides a solid foundation for the precision-aligned motor assembly. Perimeter venting relieves pressure under the spider, supports a linear excursion, and helps dissipate heat from the voice coil and motor structure.
Tinsel Leads: The tinsel lead wires are woven into the spider to relieve mechanical stress.
Speaker Terminals: The spring loaded, nickel-plated terminals provide solid connections for speaker wire up to 8 gauge. Single banana plugs and pin connectors will also fit.
Break-in Period: Due to the complex nature of Kicker Comp VT speakers, they require a break-in period in order to produce optimum low-bass response. The high-performance suspension system makes the speaker very stiff out-of-the-box. Approximately 2 weeks of daily playing will allow the suspension to break-in and reach its optimum equilibrium. A broken-in subwoofer will exhibit stronger bass performance, smoother response, and greater low-bass extension.
Rubber Magnet Boot: A black rubber boot covers the outside edge of the magnet structure to improve the cosmetics of the woofer and protect the magnet during installation.
Marine Ready: This woofer is made with a powder coated, weather resistant basket and stainless steel hardware, so it can be used in marine and mobile applications.
Enclosure Compatibility
Depth: Kicker's new CVT series is designed to minimize depth, giving you subwoofer options where standard enclosures don't fit. The vent-less, solid-pole design allows the woofer to be mounted directly against the rear wall of a sealed or vented enclosure. The spring-loaded binding posts are mounted parallel to the cone surface to minimize depth. Also the steel Clearance Adapter Plate enables you to cut out part of the back of the enclosure to create more room for the woofer magnet, subtracting the enclosure wall depth from the equation.
Power Handling: The power handling specifications differ according to the type and size of the enclosure.
Recommended Sealed Box Volume:
* Compact (minimum enclosure volume): 1.0 cu/ft; the woofer can handle up to 400 watts RMS
* SQ (maximum enclosure volume): 4.6 cu/ft; the woofer can handle up to 300 watts RMS
Recommended Vented Box Volume:
* Compact: 1.75 cu/ft; 2.5" x 12.5" port opening; 20" port depth; the woofer can handle up to 300 watts RMS
* SPL/Deep Bass: 2.25 cu/ft; 3" x 12.5" port opening; 20.5" port depth; the woofer can handle up to 300 watts RMS
Note: The power handling specifications listed with the vented enclosure recommendations apply only when a 25Hz, 24dB/octave subsonic filter (sold separately) is used with this woofer. If a subsonic filter is not used, power handling may decrease, excessive port noise can occur, and the life of the woofer may be shortened.
# 12" 2-ohm subwoofer
# injection-molded polypropylene woofer cone with ribbed Santoprene surround
# suitable for marine use
# power handling: 50-400 watts RMS (800 watts peak power)
# frequency response: 25-350 Hz
# sensitivity: 87.1 dB
# top-mount depth: 4-3/8"
# sealed box volume: 1.0-4.6 cubic feet
# ported box volume: 1.75-2.25 cubic feet
# Recommended Q-Logic Box Type: 1, 2, 3
|
Kenwood Excelon KFC-XW1200F Shallow-mount 12" 4-ohm subwoofer
|
|
|
|
Pioneer TSSW301D 1400 Watt 12-Inch Shallow Subwoofer
|
|
Diamond Audio D312D4 / D312D2 Dual Voice Coil 12" Sub Woofer DVC
|
|
|
|
|
|
|
Pioneer TSSW301D 1400 Watt 12-Inch Shallow Subwoofer
|
Diamond Audio D312D4 / D312D2 Dual Voice Coil 12" Sub Woofer DVC
|
|
|
|
Infinity 122.7w Kappa 12 Inch Subwoofer 1 or 4 ohms
|
|
SOUNDSTREAM TSQ-122 TSQ-124 12 INCH SQUARE SUB WOOFER
|
|
|
|
|
|
|
Infinity 122.7w Kappa 12 Inch Subwoofer 1 or 4 ohms
|
SOUNDSTREAM TSQ-122 TSQ-124 12 INCH SQUARE SUB WOOFER
|
|
|
|
SOUNDSTREAM RW-12 12 INCH SUB WOOFER
|
|
Power Acoustic MOFO 12 inch Sub Woofer
|
|
|
|
|
|
|
SOUNDSTREAM RW-12 12 INCH SUB WOOFER
|
Power Acoustic MOFO 12 inch Sub Woofer
|
|
|
|
Pioneer TSSWX310 12-Inch Shallow Subwoofer
|
|
JBL P1024 12" Plus One Dual-Voice -Coil Subwoofer
|
|
|
|
|
|
|
Pioneer TSSWX310 12-Inch Shallow Subwoofer
|
P1024 12" Plus One Dual-Voice -Coil Subwoofer
|
|
|
|
Infinity Perfect 12DVQ - 12VQ Kappa Series 400 Watt RMS 12" Die-Cast Subwoofer
|
|
Hypnotic HZQ12D2 HZQ12D4 12 inch subwoofer
|
|
|
|
|
|
|
Infinity Perfect 12DVQ - 12VQ Kappa Series 400 Watt RMS 12" Die-Cast Subwoofer
|
Hypnotic HZQ12D2 HZQ12D4 12 inch subwoofer
|
|
|
|
Quantum Q12d2SPL Q12d4SPL 12 inch SubWoofer DVC
|
|
Kicker 07VC12 Comp Single 12" inch
|
|
|
|
|
|
|
Quantum Q12d2spl Q12d4spl 12 inch SubWoofer DVC
|
Vicious Comp-Loaded Sub Boxes dole out truckloads of affordable bass. Whether it's menacing dual-sub enclosures that refuse to quit, a thin-profile box for your truck cab, or the new VC12 housing a brutal 12-inch Comp Subwoofer, the onslaught of bottom end rumbling from your trunk or haul space makes the value of Comp-Loaded Sub Boxes that much harder to believe.
DC12 (12-inch Comps) and DC10 (10-inch Comps) Dual-Sub Boxes give outrageously expensive bass a bad name by offering a couple of new round Comp Subwoofers in a stout, black-and-gray-carpeted KICKER box at a tremendous value. A TC10 Sub Box featuring a boisterous 10-inch Comp puts swagger where there are space limitations with its thin-profile enclosure that allows for maximum mounting options. All Comp Sub Boxes are ported for the most intense loudness.
The four Comp Sub Boxes feature a custom-designed, combination vent/terminal cup, where the impedance designator (2 or 4 Ohm in dual-sub boxes; 4 Ohm only in single-sub boxes) and oversized port share space.
The VC Series vented enclosures combine KICKER’s award winning line of subwoofers with computer-modeled and human fine-tuned enclosures to offer a level of bass performance never before thought possible from a commercially available, ready-to-install subwoofer system. Designed for use in SUV and sedan type vehicles.
Subwoofer Features:
* 12" Comp Series Subwoofer
* Power Handling:
o Peak: 300 watts
o RMS: 150 watts
* Vacuum formed polymineral cone woofer with inverted structural dome
* Double-stitched polyfoam surround
* Rear cone bracing structure
* Sleeved high-power tinsel lead wire
* Spring-loaded nickel-plated terminals
* Two-piece vented hyper-extended blackened pole piece and backplate
* Perimeter venting in the basket and motor assembly
* High temperature polyimide film voice coil former
* 45oz. Magnet
* Frequency response: 27-500 Hz
* Sensitivity without enclosure: 89 dB
* Sensitivity with enclosure: 95 dB
Enclosure Features:
* Single 12" Vented Sub Enclosure
* Combination vent and terminal cup gives the enclosure a cleaner install look
* Dimensions: 11-9/16"TD x 14-13/16"BD x 17-1/2"W x 16"H
|
|
|
|
Soundstream VGW-12 12" Subwoofer 60
|
|
IMAGE DYNAMICS ID12D2V3 ID12D4V3 ID12 SERIES 12 INCH SUB WOOFER
|
|
|
|
|
|
|
Soundstream VGW-12 12" Subwoofer 60
|
IMAGE DYNAMICS ID12D2V3 ID12D4V3 ID12 SERIES 12 INCH SUB WOOFER
|
|
|
|
Infinity 1220SE 300 Watt Single 12" Preloaded Enclosure with Slipstream Port
|
|
Soundstream T5-12 Subwoofer XStream Series
|
|
|
|
|
|
|
Infinity 1220SE 300 Watt Single 12" Preloaded Enclosure with Slipstream Port
|
Soundstream T5-12 Subwoofer XStream Series
|
|
|
|
Hypnotic HZ12D2 HZ12D4 12 inch Sub Woofer
|
|
KENWOOD PW612 DUAL 12" AND AMP PARTY COMBO PACKAGE
|
|
|
|
|
|
|
Hypnotic HZ12D2 HZ12D4 12 inch Sub Woofer
|
KENWOOD PW612 DUAL 12" AND AMP PARTY COMBO PACKAGE
|
|
|
|
Kicker 09S12C Solo Classic 12" inch Subwoofer
|
|
Kicker 08S12L5 Solo-Baric L5 12" inch SubWoofer
|
|
|
|
|
|
Solo Classic takes a page straight outta KICKER legend, and ushers it into the future…
“All the bass. Half the space.” That’s how we billed it nearly 20 years ago when the Solo-Baric Subwoofer ruled the roadways. The concept was breakthrough – a subwoofer that actually worked as two woofers in an isobaric enclosure, therefore using a box nearly half the size of those for conventional woofers. Genuine, deep, loud… it was the real deal, without sacrificing storage space.
In 2009, the Solo Classic Subwoofer provides the deepest, most musical bass from the smallest areas, at the same time promoting valuable storage space in a vehicle. It is designed to be used solely with small, sealed enclosures and generates the most pressure allowable.
The Solo Classic takes its place among KICKER’s family of potent round subwoofers, borrowing the latest technology cues from its siblings while remaining true to its roots in utilizing a tiny enclosure. Its recommended sealed-enclosure designs provide the absolute lowest, smoothest response with increased energy at rock-bottom frequencies.
The Solo Classic’s detailed, accurate bass is a result of extreme air pressure from a small sealed box, just like its predecessor way back when. However, these days, the Solo Classic uses resilient SoloKon™ and high-temp, dual voice coils to withstand massive excursion and create punishing bass. Other recent lab developments include the T-cut top plate, polyimide voice-coil former, ventless solid-pole design, and Spiralead™ tinsel leads that result in supreme reliability. Stitched surround, stamped-steel basket, and spring-loaded terminals remain KICKER standards on the subwoofer checklist.
Model Solo Classic 12
Size (IN.,CM) 12, 30
Impedance (OHMS) 2 or 4 DVC
Max Rec Amplifier Power (WATTS PEAK/RMS)* 1200/600
Sensitivity (dB 1w/1m) 88
Frequency Response (Hz) 20-100
Mounting Depth (IN.,CM) 6-5/16, 16
Mounting Cutout (IN.,CM) 11-1/8, 28.3
Rec. Sealed Box Volume (CU. FT., Liters) .88, 24.92
# Based on the original SoloBaric subwoofers
# Very small box performance
# Accurate, detailed bass
# SoloKon to withstand extreme air pressure in small boxes
# Stamped steel basket
# T cut top plate for high magnetic field strength and cooling capability
# Polyimide voice coil former with Nomex reinforcement for high thermal capability
# Stitched and glued tinsel leads for high excursion and reliability
|
Kicker 08S12L5 Solo-Baric L5 12" inch SubWoofer
|
|
|
