 |
 |
 |
|
kenwood KDC-MP142 CD MP3 Aux in Stereo Reciever
Simple yet effective. Kenwood's KDC-MP142 CD receiver starts with a driver-friendly control panel, including a large jog dial that gives you instant access to all major functions. If you're bringing a portable music player along for the ride, this receiver features an illuminated auxiliary input that you can find in the dark without fumbling around. Kenwood also includes a full-featured remote control, so you can concentrate on the road while your passengers adjust the sound and choose the tunes.
Play all your CDs
The KDC-MP142 plays your prerecorded and recordable CDs, even discs filled with music files. The jog dial combines with a "Search" key to blaze through your MP3 and WMA files, so you can find the song you want in a flash. The stereo's built-in amplifier delivers plenty of punch, and you can mold the sound with a 3-band equalizer, six preset tone curves, and a potent bass boost.
Adding a sub?
A set of preamp outputs allows easy connection to an outboard amplifier. If you're adding a subwoofer, you can switch the outputs to sub mode, activating a low-pass filter and level adjustment for hands-on control over your bass.
Details:
General features:
CD player with built-in MOSFET amplifier (22 watts RMS/50 peak x 4 channels)
plays CDs, CD-Rs, and CD-RW discs including discs loaded with MP3 and WMA music files
detachable face
remote control
Audio features:
System Q Sound Control (6 EQ curves and a 3-band equalizer)
low-pass filter and subwoofer level control
Expandability:
inputs: front-panel auxiliary input
outputs: one set of preamp outputs (switchable to subwoofer mode)
Other features and specs:
warranty: 1 year
Features
Overview: The Kenwood KDC-MP142 AM/FM CD receiver features a detachable face, front auxiliary input, selectable rear/subwoofer 2-volt preamp output and MP3/WMA playback. The headunit also comes supplied with an easy to use IR wireless remote control. The unit's amplifier is rated at 22 watts x 4 channel RMS and 50 watts x 4 channel peak.
Detachable Face: The unit features a single front loading CD face that detaches from the chassis to deter theft.
Note: The unit does not come with a face case. An optional black vinyl/nylon carrying case (142DFC1X, sold separately) is available.
MP3/WMA Playback: The KDC-MP142 can play MP3 (8-320 kbps) and WMA (48-192 kbps) files recorded on CD-ROM, CD-R, and CD-RW discs in ISO9660 Level 1/Level 2, Joliet, Romeo and Long file name formats. Each disc should have a maximum of 8 directory levels, 50 folders, and 255 files per folder (512 maximum number of files and folders). During MP3/WMA playback, the unit displays any recorded ID3 Tag information up to 30 characters.
Supreme Setting: When MP3 or WMA files encoded at a low bit rate (less than 96 kbps, 44.1k, 48kHz) are played, the Supreme Setting function restores their high frequencies so the sound quality is closer to files encoded at a high bit rate. The processing is optimized for the compression format and the bit rate used. When the Supreme Setting is Off, the unit plays the original sound stored in the audio file.
AUX In: The unit is equipped with a front panel 3.5mm minijack auxiliary input that can be used to input audio from a portable audio source such as an MP3 player.
Auxiliary Display: The KDC-MP142 allows you to select the source type displayed when using the auxiliary input. You can choose from AUX, DVD, Portable, Game, Video or TV.
Rotary Volume Control: The CD receiver uses a rotary volume control that increases and decreases the volume of the stereo from 0 to 35. The rotary knob also controls other audio settings such as Balance, Fader, Bass, Mid, Treble and preset EQ settings. In addition, the rotary knob allows you to scroll through and select your music tracks when the Music Search function is activated.
Speaker Settings: The Speaker Setting function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Speaker Setting of "SP Off" (flat), "SP OEM" (for OEM factory speaker systems), "SP 6x9/6" (for systems with 6" and 6"x9" speakers), or "SP 5/4" (for systems with 4" and 5" speakers).
System Q Sound Control: Six EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music. Each preset has its own level settings for bass (100Hz), midrange (1kHz), and treble (10kHz). You can choose from the following preset EQ curves - Rock, Pops, Easy, Top 40, Jazz, and Natural.
Bass/Treble/Mid Control: The KDC-MP142 also features independent Bass, Treble and Midrange control. You can adjust each one from -8 to +8db. The bass frequency is adjusted at 100 Hz, the treble frequency is adjusted at 10 kHz and the midrange frequency is adjusted at 1 kHz.
Bass Boost: The Kenwood CD receiver also features a Bass Boost control that can be set to the following levels - BB1, BB2 or Off.
Fader/Balance Control: The KDC-MP142 CD receiver feature balance and fade controls from Left15 to Right15 and Rear15 to Front15. The CD receiver uses a Type 1 and Type 5 fader. When the preamp output is set to "Rear" the receiver uses a Type-5 fader that allows you to fade between the front speaker channels and the rear speaker channels along with the rear preamp output. When the preamp output is set to "Subwoofer" the receiver uses the type 1 fader which only allows fading between the front and rear speaker channels while the subwoofer preamp output is non-fading .
Source Tone Memory: This feature allows you to store System Q bass, middle and treble tone settings for each source (CD, Tuner, and Aux).
Volume Offset: The level of each source may be independently adjusted to prevent radical leaps in output volume when switching from one source to another. The available settings range from -8 to 0.
Selectable Preamp Output: The KDC-MP142 features a preamp output that you can adjust from a full-range rear speaker preamp output to a low-pass subwoofer preamp output.
Low Pass Filter: The receiver features a built-in Low Pass Filter control for the preamp-output when the output is set to Sub. You can select from 80, 120, 160 or Through (Off).
Subwoofer Level: Once you have switched the preamp output to "subwoofer" you can independently control the subwoofer preamp output level from the CD receiver. You select levels between -15 to +15.
Text/Title Scroll: The KDC-MP142 will display CD text or Audio file text. You can turn the scrolling feature "on" to scroll longer titles across the screen.
Music Search: The Kenwood AM/FM CD receiver features a Music Search feature which allows you to scroll through and select your MP3/WMA music folders and files, as well as scroll through your audio CD's music tracks using the headunit's rotary knob.
Last Position Memory: If the unit is shut off or switched to the tuner mode while a CD is playing, the next time CD is selected as the source, playback will resume from the point where it left off.
Off Eject: The KDC-MP142 allows you to eject your disc for 10 minutes after switching off the vehicles engine.
CD Force: When there is a problem with playing a CD with a special format, this setting plays the CD by force. Some CDs still may not play in the CD Force mode.
CR-2 Advanced Tuner: This unit uses Kenwood's CR-2 Advanced tuner for clear radio reception. You can choose one of three tuning modes: Auto 1 (seek tuning), Auto 2 (cycles through and tunes the selected band's preset stations only with each button press), or Manual.
Auto Memory Tuning: Not only does the CD receiver's tuner allow you manually enter your desired presets you can choose to have the unit automatically put stations with good reception in the memory banks automatically; this is a handy feature when traveling. The tuner features 3 FM banks (1, 2, 3) and 1 AM bank. You can store 6 presets for each AM/FM bank giving you a total of 18 FM presets and 6 AM presets.
Clean Reception System Circuit (CRSC): This circuit controls multi-path distortion by reducing stereo separation. As stereo separation is reduced, multi-path has less effect on the radio signal, improving reception in areas with tall buildings and mountains. The CRSC circuit can be turned on or off.
Tel Mute: The KDC-MP142 features a cell-phone mute wire (brown) in its harness that when hooked up to your car's phone system mute wire will automatically mute the receiver's audio signal when a call comes in.
Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed." In addition, while the unit is in Standby mode, you can turn the clock display on or off. When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed." Pressing and holding the source button turns the unit off completely.
Display Dimmer: The display has two brightness settings. You can change this setting within the menu.
Demo Mode: This unit features a Demo mode which can be turned "on" or "off" within the menu.
Remote Control: The KDC-MP142 comes with the RC-517 IR wireless remote control with a full numeric keypad. The remote will control Audio, CD, and Tuner functions. The remote control allows direct track access of your music and features a mute button. It is powered by 2 "AA" batteries (supplied). The dimensions of the remote are: L = 5.362", W = 1.958", D = 1.125". |
|
|
|
|
|
|
|
|
