 |
 |
 |
|
| KENWOOD KRC-335 CASSETTE STEREO TAPE RECIEVER |
|
|
|
|
|
 |
|
 |
|
Features
- Your prized cassettes will be lovin' life with Kenwood's KRC-335 cassette receiver. Full-logic controls offer soft-touch elegance with convenient features like music search and blank skip, while Dolby B noise reduction delivers better frequency response and a cleaner sound. Punch in one of the System Q's 6 preset EQ curves for dramatic, sound-shaping tone control. The muscular built-in amp pumps out 4 x 22 watts RMS power to make your music crisp and detailed.
- Add a Kenwood CD or MD changer to your system and enjoy hours of continuous music with the KRC-335's built-in CD changer controls. For even more power, two sets of preamp outputs simplify connection of external amplifiers. And with your safety and convenience in mind, Kenwood includes a wireless remote.
- Details:
- detachable face
- white display
- CR-2 tuner
- 2 sets of preamp outputs
- CD/MD changer controls
- full-logic controls
- music search
- blank skip
- Dolby B
- System Q
- clock
- wireless remote
- 22 watts RMS/45 peak x 4 channels
- tape frequency response: 30-18,000 Hz
- tape signal-to-noise ratio: 65 dB
- FM sensitivity: 9.3 dBf
- warranty: 1 year
- Features
- Dual Info Display: The clock and source information can be displayed simultaneously.
- System Q Sound Control: 6 EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music. The preset curves are named "Flat", "Rock", "Top 40", "Jazz", "Easy" and "Pops". Each preset has its own bass, middle, and treble level settings.
- Mobile Preset: The Mobile Preset function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Mobile Preset setting of "SP-F" (flat), "SP-O" (for OEM factory speaker systems), "SP-6" (for systems with 6" and 6"x9" speakers) or "SP-5" (for systems with 4" and 5" speakers).
- Source Tone Memory: This feature allows you to store bass and treble tone settings for each source (cassette, changer, FM, AM).
- CR-2 Tuner: This unit uses Kenwood's CR-2 tuner for clear radio reception.
- Clean Reception System Circuit (CRSC): This circuit controls multi-path distortion by reducing stereo separation. As stereo separation is reduced, multi-path has less effect on the radio signal, improving reception in areas with tall buildings and mountains.
- Dolby B: This feature reduces tape hiss for improved sound quality.
- Metal Tape Selector: The Metal Tape Selector provides smoother sound by allowing you to select the proper equalization for playing back metal tapes.
- Tape Advance: This feature rewinds the tape to the beginning of the current track or fast forwards the tape to the beginning of the next track. It does this by detecting the blank spaces between the songs.
- Blank Skip: This feature automatically skips blank tape sections longer than 10 seconds, stopping and playing at the next recorded section.
- Music Repeat: When playing a cassette, this feature allows you to repeat the current track.
- Auxiliary Input "Ready": When used with an optional adapter (KCA-S220A or CA-C1AX) or with the KDC-CX87 CD changer, this unit can accept input from an auxiliary source. This unit cannot accept input from an auxiliary source unless the appropriate adapter or CD changer is purchased and connected. When the CA-C1AX adapter (item 113CAC1AX) is used, you cannot connect a CD changer to the head unit because the CA-C1AX plugs into the DIN changer control connection on the head unit.
- Disabled System Indicator: A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. This feature can be turned On or Off.
- External Device Controls
- Changer Controls: This unit is directly compatible with Kenwood changers manufactured from 1998 on. If the changer has an O-N switch, the switch will need to be set to the "N" position. In addition to basic disc navigation features, this unit has the following changer controls: track intro scan, track repeat, disc repeat, disc random, and all disc random.
- Note
- Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed". In addition, while the unit is in Standby mode, the Clock Display can be turned on or off using the CLK button. When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed". Pressing and holding the source button turns the unit off completely.
- Chassis Size Code IEJ
- RMS Power Output 22 watts
- Peak Output 45 watts
- CEA Compliant ---
- RMS Power Bandwidth 30-20kHz
- Preamp Outputs 4-channel
- Sub Preamp Outputs No
- Preamp Voltage 1.8 volts
- Display Color White/Blue
- Key Button Color Green/Blue
- EQ Bands 3
- Sound Shaping Type System Q
- Wireless Remote Yes
- Wired Remote No
- Steering Wheel Control Compatible ---
- Security Detachable face
- Flip-Down Face No
- Parts Warranty 1 Year
- Labor Warranty 1 Year
- Expandability
- iPod Connection/Control No
- AUX Input Optional
- USB Input No
- Memory Card Slot No
- A/V Inputs No
- Bluetooth Compatible No
- Satellite Radio Ready No
- HD Radio No
- Navigation No
- Changer Control Yes
- Tuner
- Tuner Type CR-2
- FM Sensitivity 9.3 dBf
- FM Presets 18
- AM Presets 6
- European Tuning Yes
- Seek/Scan Seek
- Radio Data System No
- Playback
- CD Frequency Response Not Compatible
- CD Signal-to-Noise Not Compatible
- CD-R Playback Not Compatible
- CD-RW Playback Not Compatible
- MP3 Playback Not Compatible
- WMA Playback Not Compatible
- AAC Playback Not Compatible
- DVD Playback Not Compatible
|
|
|
 |
|
 |
|
|
|
