 |
 |
 |
|
| KENWOOD DPX302 DOUBLE DIN CD MP3 STEREO RECIEVER |
|
|
|
|
|
 |
|
 |
|
Features
- Kenwood designed the DPX302 CD receiver to fill the 4" tall radio opening found in a variety of Japanese and American vehicles. This versatile stereo offers great looks, powerful sound-shaping tools, and customized stereo expandability.
- The DPX302 plays hours of MP3, WMA, and AAC files that you've loaded on a CD, so one disc will last an entire trip. For further musical flexibility, you can connect your portable audio player to the handy auxiliary input on the front panel. The powerful onboard amplifier ensures clean sound from your speakers, while System Q puts a 3-band equalizer and other sound controls at your fingertips.
- Read More
- The remote control makes it easier to makes stereo adjustments while you're on the go. Two sets of preamp outputs let you add external amplifiers or powered subs, and the built-in frequency filters and subwoofer controls let you tune your system to perfection. Create the stereo system you want by selecting from Kenwood's wide array of optional components.
- Note: If you're going to use your iPod with this receiver, be sure to check "Hands-on Research" for specific iPod model compatibility with this receiver or its optional iPod adapter.
- Details:
- General features:
- CD player with built-in MOSFET amplifier (22 watts RMS/50 peak x 4 channels)
- plays CDs, CD-Rs, and CD-RW discs, including discs loaded with MP3, WMA, and AAC files (will not play Digital Rights-protected music files on disc)
- remote control
- Audio features:
- System Q Sound Control (6 EQ curves and a 3-band equalizer)
- "Supreme" audio processing for better sound from your compressed MP3 and WMA files
- speaker settings that allow you to tailor the sound to the size and type of speakers in your car
- high- and low-pass filters
- Expandability:
- front-panel auxiliary input
- compatible with Kenwood's Bluetooth® and iPod® control adapters and HD Radio™ tuner
- satellite radio-ready (XM or SIRIUS tuner, service subscription, and antenna required)
- CD changer controls
- two sets of preamp outputs
- Other features and specs:
- clock
- CD frequency response: 10-20,000 Hz
- CD signal-to-noise ratio: 105 dB
- FM sensitivity: 9.3 dBf
- warranty: 1 year
- Features
- 2-DIN Chassis: The DPX302 has a 2-DIN chassis (also known as "Double DIN" or size DD), and will fit in many vehicles with a large dash opening. The Double-Din head unit features an AM/FM tuner, CD player, Changer controls and is Satellite Radio, HD Radio and iPod ready along with a front panel AUX input and two sets of 2.5V preamp outputs. The unit can be ISO-mounted using factory brackets, or Euro-mounted using the supplied mounting sleeve. As always, please check the Crutchfield Vehicle Selector to verify fit with your vehicle.
- AAC/MP3/WMA Playback: The receiver can play AAC, MP3 and WMA files recorded on CD-ROM, CD-R, and CD-RW discs in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. Each disc should have a maximum of 8 directory levels, 100 folders, and 255 files per folder. During MP3/WMA playback, the unit displays any recorded ID3 Tag information. AAC ID3 tags cannot be displayed.
- Supreme Setting: When MP3 or WMA files encoded at a low bit rate (less than 96 kbps, 44.1k, 48kHz) are played, the Supreme Setting function restores their high frequencies so the sound quality is closer to files encoded at a high bit rate. The processing is optimized for the compression format and the bit rate used. When the Supreme Setting is Off, the unit plays the original sound stored in the audio file.
- CD Force: When there is a problem with playing a CD with a special format, this setting plays the CD by force. Some CDs still may not play in the CD Force mode.
- System Q Sound Control: Six EQ curves are preset into memory, allowing you to recall the best preset EQ curve for different types of music. Each preset has its own level settings for bass (100Hz), midrange (1kHz), and treble (10kHz). Each level can also be set to your personal taste between -8 and +8 and stored in the "User" memory. The 6 preset curves with their respective bass, mid, and treble levels are as follows:
- Rock: Bass +6, Mid +1, Treble +2
- Pops: Bass +3, Mid +2, Treble +6
- Easy: Bass +6, Mid 0, Treble -2
- Top 40: Bass +3, Mid +1, Treble +8
- Jazz: Bass +5, Mid +2, Treble +2
- Natural: Bass 0, Mid 0, Treble 0
- Speaker Settings: The Speaker Setting function tailors the System Q Sound Control settings according to the type of speakers in your vehicle. You may select a Speaker Setting of "SP Off" (flat), "SP OEM" (for OEM factory speaker systems), "SP 6x9/6" (for systems with 6" and 6"x9" speakers), or "SP 5/4" (for systems with 4" and 5" speakers).
- Loudness: The Loudness feature compensates for low and high tones during low volume. You can turn this feature either on or off. Only the low tone is compensated for when the tuner is selected as a source.
- Source Tone Memory: This feature allows you to store System Q bass, middle and treble tone settings for each source (CD, FM, AM, Satellite, and CD changer).
- Front and Rear High-Pass Filter: The DPX302 features an independent High-Pass Crossover for the front and rear channels. You can adjust the high-pass crossover from Through, 40,60, 80, 100, 120, 150, 180 or 220Hz. The "Through" selection is a full-range setting. This feature is very helpful when you have smaller-type speakers in the front and larger-type speakers installed in the rear of the vehicle.
- Switchable Rear/Subwoofer Preouts: You can switch the rear RCA preamp outputs to a non-fading subwoofer output with independent volume control (-15 to +15), phase control (Normal/Reverse), and selectable crossover (50Hz, 60Hz, 80Hz, 100Hz, 120Hz or Through).
- Built-in Amp Switch: If the audio signals are output to external amplifiers, you can turn off the internal amplifier to improve audio quality.
- Volume Offset: The level of each source may be independently adjusted to prevent radical leaps in output volume when switching from one source to another. The available settings range from -8 to 0 for all sources other than the AUX input which you can set from -8 to +8.
- AUX Input: The DPX302 is equipped with a front panel 3.5mm minijack auxiliary input for connecting external portable audio devices such as an MP3 player or Tape walkman. The receiver allows you to select between the following AUX settings.
- Off: the source button does not scroll through the AUX input when function is turned "off"
- Aux 1: turns on the AUX input for use
- Aux 2: turns on the AUX input in the attenuator mode - press the attenuator button to activate sound
- Auxiliary Display: The DPX302 allows you to select the source type displayed when using the auxiliary input. You can choose from AUX, DVD, Portable, Game, Video or TV.
- CR-2 Advanced Tuner: This unit uses Kenwood's CR-2 Advanced tuner for clear radio reception. You can choose one of three tuning modes: Auto 1 (seek tuning), Auto 2 (cycles through and tunes the selected band's preset stations only with each button press), or Manual.
- Clean Reception System Circuit (CRSC): This circuit controls multi-path distortion by reducing stereo separation. As stereo separation is reduced, multi-path has less effect on the radio signal, improving reception in areas with tall buildings and mountains. The CRSC circuit can be turned on or off.
- Auto Memory Tuning: Not only does the CD receiver's tuner allow you manually enter your desired presets you can choose to have the unit automatically put stations with good reception in the memory banks automatically; this is a handy feature when traveling. The tuner features 3 FM banks (1, 2, 3) and 1 AM bank. You can store 6 presets for each AM/FM bank giving you a total of 18 FM presets and 6 AM presets.
- Receive Mode: If you choose to connect the optional HD tuner, the Receive Mode allows you to choose to receive analog or digital AM/FM broadcasts. You can choose from the following.
- Auto: analog and digital broadcast will be received with the digital broadcast having priority
- Digital: receives digital broadcasts only
- Analog: receives analog broadcasts only
- Tel Mute: The DPX302 features a cell-phone mute wire (brown) in its harness that when hooked up to your car's phone system mute wire will automatically mute the receiver's audio signal when a call comes in.
- Security Code: You can enter a 4-digit security code which must be used when the unit is removed from the vehicle, or the constant power source is disconnected from the unit. When constant power is restored to the unit, the security code must be entered before the unit becomes operational. The security code may be disabled if desired.
- Beep Tone: The CD player features a touch sensor tone that beeps when you have selected a function of the unit. You can turn the beep tone ON or Off.
- FL Display: The unit features a large 14-segment Fluorescent display that uses a black background and blue characters that are easy to read.
- Text/Title Scroll: The DPX302 will display CD text, Audio file text and Satellite and HD radio text. You can turn the scrolling feature "on" to scroll longer titles across the screen.
- Display Illumination/Clock Display: When the unit is in Standby mode, the face/button illumination is "keyed." In addition, while the unit is in Standby mode, you can turn the clock display on or off. When the Clock Display is turned on and the unit is in Standby mode, the Clock Display is also "keyed." Pressing and holding the source button turns the unit off completely.
- Display Illumination Control: When this function is active, the display turns off after 5 seconds if no operation is performed. This reduces the glare during night driving.
- Dimmer: The dimmer function will dim this unit's display automatically when the vehicle light switch is turned On when you connect orange/white Illumination wire of this player.
- Remote Control: The DPX302 comes with the RC-557 wireless remote control with a full numeric keypad. It is powered by 2 "AA" batteries (supplied). The dimensions of the remote are: L = 5.361", W = 1.961", D = 1.125".
- External Device Controls
- Optional iPod Adapter: This receiver is compatible with the optional Kenwood KCA-iP500 iPod control interface (item # 113IP500). When an iPod is connected to the interface, all of the iPod's controls will be disabled and it will be controlled from the receiver. With this interface, you'll be able to play your iPod music files through your Kenwood receiver and in most cases have all the titling information appear on the receiver's display.
- HD Radio Ready: With an optional Kenwood HD Radio tuner (item # 113KTCHR20), you will be able to receive digital AM/FM broadcasts from local stations where available. This new technology will significantly improve audio quality and reception, as well as include information such as artist name and song titles or traffic news, viewable on the receiver's display.
- Satellite Radio Ready: There are several options for connecting an optional XM or SIRIUS Satellite Radio receiver to this receiver:
- XM Satellite Radio: To receive XM Satellite Radio, you can connect the optional CNP2000UC XM Mini Tuner and the CNP-KEN1 Kenwood adapter cable (package item number 700XMKEN1).
- SIRIUS: To receive SIRIUS Satellite Radio, you can connect the optional SC-C1 SiriusConnect vehicle tuner (item number 607SCC1) and the Kenwood/SIRIUS adapter (item number 113KCASR50).
- Dock: Select dock-and-play and portable SIRIUS radios can be controlled using the Kenwood/SIRIUS adapter (item number 113KCASR50) and the SC-VDOC1 dock (item number 607SCVDOC1).
- Auxiliary Input: A portable satellite radio receiver, such as the Delphi SkyFi3 or SIRIUS Sportster, can be connected to the head unit via the auxiliary input (adapter may be required).
- Note: A subscription is also required to receive satellite radio programming from SIRIUS or XM.
- Bluetooth Ready: The unit is also Bluetooth compatible using the optional Kenwood KCA-BT200 Bluetooth adapter. Using this adapter you can make and answer phone calls from the Kenwood headunit. You can even download your Phonebook information from your compatible mobile phone into the headunit. You are able to register up to five compatible Bluetooth cell phones when using the KCA-BT200 adapter. Visit http://www.kenwood.com/bt/information/ for a complete list of compatible Bluetooth enabled phones.
- Changer Controls: This unit is directly compatible with Kenwood changers manufactured in 1998 or later. If the changer has an O-N switch, the switch will need to be set to the "N" position. In addition to basic disc navigation features, this unit has the following changer controls: direct disc access (using the remote), direct track access (using the remote), track intro scan, track repeat, disc repeat, disc random, and all disc random. When connected to a CD Text capable CD changer or an MD changer, this unit can display disc and track titles for discs encoded with disc and track title information. The text information can be scrolled manually or automatically.
- Rear Auxiliary Input "Ready": The unit already features a front panel auxiliary input, but if you need a second auxiliary input, one can be added to the rear of the unit. When used with an optional adapter, this unit can accept a rear input from an auxiliary source. When the CA-C1AUX adapter (item 113CAC1AX) is used, you cannot connect a CD changer to the head unit because the adapter plugs into the DIN changer control connection on the head unit. When the KCA-S220A 2-changer switch (item 113KCAS220) is used, you can connect a CD changer and an auxiliary audio source at the same time. When an auxiliary audio source is connected, you can choose from one of six names for the source: Aux Ext, TV, DVD, Video, Game, or Portable.
|
|
|
 |
|
 |
|
|
|
