 |
 |
 |
|
JVC Mobile KDBT11 50Wx4 CD Bluetooth Receiver
The JVC KD-bt11 is one of the most versatile head units we offer. JVC has packed this model with high end features such as Bluetooth technology ,adjustable EQ, Front Aux input and a high powered internal amplifier. With the built in Bluetooth technology you can make and receive phone calls right off the receiver. You will also be able to do streaming audio off of portable media devices with Bluetooth technology. The adjustable EQ allows you to fine tune your audio system to any type of music. The 2.5 volt pre outs provide power for a great set of amplifiers. With the front aux input you can add any portable multimedia to the receiver for music playback. The high powered 50x4 watt internal amplifier provides 20 watts RMS to each set of speakers. With this amount of power output you will enjoy crystal clear sound from your interior speakers.
This receiver is also IPod ,Satellite and HD radio ready. All that is required is the add on modules and you will instantly be connected.
For an advance receiver at a great price, give the JVC KD-BT11 a try. |
|
|
|
|
|
 |
|
 |
|
Features
- Description: Leave the cables behind. JVC’s Bluetooth functionality provides sophisticated and useful features for your drive. Pair up your Cell phone and enjoy hassle-free hands-free calling with crystal clear voice transmission and no echoes. Stream music wirelessly to your stereo from your iPod, Cell Phone, or Digital Audio player with outstanding sound quality. Enjoy more music, less distraction, and stay connected when you’re on the road with JVC.
- Features
- Specifications
- Compatible Formats: WMA (CD);CD-R;MP3 (via CD-R/RW);CD-RW;Audio CD
- Removable or Flipdown Faceplate: Yes
- Expandability: Multi-CD Control;Front-panel Auxiliary Input;Preamp Outputs;iPOD Ready via Adapter;HD Radio;Satellite Radio Ready
- Display Type: Single Color Display with Backlight
- Bluetooth: Enabled
- Tuner Type: FM/AM Tuner
- AM Station Memory: 6
- FM Station Memory: 18
- MOSFET amp: Yes
- Built-In Amplifier Power: 4 x 50 Watts Peak (4 x 20 RMX)
- Remote: Yes
- AUDIO STREAMING
- Listen to your music wirelessly from your iPod, Cell Phone, or Bluetooth enabled device through your stereo system. The KDBT11 Supports devices enabled for Certified Bluetooth A2DP (Streaming) and AVRCP (Remote Control and Steaming) protocols.
- Control PLAY, PAUSE, and SKIP features directly from the stereo.
- HANDS-FREE CALLING
- Make and receive calls from your cell phone directly through the stereo:
- Holds up to 50 phone book entries, 6 Preset Phone Numbers, 10 Received Calls, and 10 Redial entries internally.
- Voice Dial enables immediate dialing by simply saying the name of the call recipient.
- Text Message Notification lets you know if you have incoming SMS messages waiting to be read on your cell phone.
- UPDATABLE FOR PAIRING WITH NEW CELL PHONES
- JVC Bluetooth models are compatible with a wide variety of current Manufacturer’s cell phone models. If you upgrade your cell phone to a new model, JVC provides free updates for pairing with newer cell phones too with through an easyto- use CD-ROM upgrade site: If pairing fails:
- Log on to JVC’s Bluetooth information page at
- www.jvc-victor.co.jp/english/car/bluetooth/index.html
- Select your phone from the listing of compatible models and download the associated update file.
- Install the update file onto a CD-R Disc and insert it into the Bluetooth stereo.
- The JVC stereo will automatically update to work with your new cell phone.
- GENERAL FEATURES
- MOS-FET 50W x 4
- 20W x 4 RMS
- HS-IV Tuner
- 3-Band Parametric iEQ
- 24-bit DAC
- Subwoofer Control
- Rear / Sub Selectable Output
- CD / CD-R / CD-RW
- J-BUS Terminal
- Built-In Bluetooth
- HD Radio Ready
- Ready for iPod
- SAT Radio Ready
- MP3 / WMA
- Detachable Face
- Front AUX Input
- JVC built Bluetooth® capability into their KD-BT11 CD receiver so you can enjoy the safety and convenience of hands-free calling and music streaming. When a call comes in, press a button to mute the music and speak to your caller — without touching your cell phone. Music streaming lets you play the music from any Bluetooth audio device through the stereo.
- The 24-bit digital-to-analog converter and the strong internal amp deliver high-caliber sound from your standard and recordable CDs; this stereo can also handle MP3 and WMA files on disc. Tweak the sound with the 3-band equalizer to compensate for the acoustics in your vehicle.
- Read More
- You can add JVC's iPod® adapter for full control over your iPod from the KD-BT11, or use the front-panel auxiliary input for your other music players. Connect an optional satellite radio for non-stop music, sports, news, and talk. For more robust sound, use the set of preamp outputs to send signal to a powered subwoofer — you can adjust the bass with the receiver's built-in subwoofer level control.
- Note: If you're going to use your iPod with this receiver, be sure to check "Hands-on Research" for specific iPod model compatibility with this receiver or its optional iPod adapter.
- Note: Bluetooth compatibility of this device may vary, depending on your phone and service provider.
- Details:
- General features:
- CD receiver with built-in MOSFET amplifier (20 watts RMS CEA-2006/50 peak x 4 channels)
- plays CDs, CD-Rs, and CD-RWs (including discs loaded with MP3 and WMA files)
- detachable face
- remote control
- Audio features:
- 3-band equalizer
- 24-bit digital-to-analog converter
- Expandability:
- built-in Bluetooth capability for hands-free calling and music streaming
- compatible with: iPod adapter, satellite radio, CD changer
- inputs: front-panel auxiliary input
- outputs: one set of preamp outputs (selectable subwoofer output)
- MOS-FET Amplifier: The JVC KD-BT11 features a MOS-FET amplifier that is CEA-2006 compliant and rated at 20 watts RMS x 4 channels in 4-ohm and 1% THD+N with a signal to noise ratio of 80 dBA.
- MP3/WMA Playback: The KD-BT11 can play MP3/WMA files that have been recorded on CD-R and CD-RW discs. The disc must be recorded in one of the following formats: ISO 9660 Level 1/Level 2, Joliet, Romeo or Windows long file. You can directly access folders numbered 01-12 (they must be assigned two-digit numbers when recorded). Each disc can have a maximum of 8 folder hierarchies, 200 folders, and 512 files on a disc. The unit also supports IDTag3 (version 1.0, 1.1, 2.2, 2.3 or 2.4) for album and artist information from MP3 or WMA files. The unit can recognize file and folder names from 12 characters to 128 characters depending on the disc format.
- 24 Bit D/A Converter: The JVC KD-BT11 utilizes a 24-bit digital to analog converter for superior CD sound quality.
- Preferred Setting Mode: By activating the Preferred Setting Mode (PSM), you can set the clock, choose the time zone and daylight saving time, select the dimmer mode, select the external component type (changer or line input), turn on/off ID3 Tag display, switch between US standard and European tuning spacing, set the Amplifier Gain control (high/low), and several other operational settings.
- Intelligent Equalizer (i-EQ): The KD-BT11 has a 3-band parametric EQ with manually adjustable low (60 Hz, 80 Hz, 100 Hz, or 120 Hz), midrange (500 Hz, 1 kHz, 1.5 kHz or 2.5 kHz), and high frequency (10 kHz, 12.5 kHz, 15 kHz or 17.5kHz) settings and bandwidth settings (0.5Q, 0.75Q, 1.0Q, 1.25Q, 1.5Q, or 2.0Q). The settings for each EQ band varies from -6 to +6 dB. In addition, this unit also has six selectable preset sound mode combinations. Each of the sound modes may be adjusted to your preference and stored in one of three user memories. The preset Intelligent EQ modes are:
- Sound Modes Preset Values
- Low Mid High
- Level Freq. Q Level Freq. Q Level Freq. Q
- User Flat 00 60 Hz Q1.25 00 1 kHz Q1.25 00 10 kHz Fixed
- Rock +03 100 Hz Q1.0 00 1 kHz Q1.25 +02 10 kHz Fixed
- Classic +01 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz Fixed
- Pop +02 100 Hz Q1.25 +01 1 kHz Q1.25 +02 10 kHz Fixed
- Hip Hop +04 60 Hz Q1.0 -02 1 kHz Q1.0 +01 10 kHz Fixed
- Jazz +03 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz Fixed
- Loud (Loudness): This feature boosts low and high frequencies to produce a well-balanced sound at a low volume level. You can turn this feature on or off.
- Amplifier Gain Control: When you are using the KD-BT11 with factory speakers (or those rated to less than 50 watts peak), the Amplifier Gain Control can limit the amount of power being sent to those speakers. When the Amp Gain Control is set to "low," the volume control ranges from 0 (minimum) to 30 (maximum). When using speakers rated higher than 50 watts peak, you can set the Amp Gain Control to "high," and the volume control will range from 0 to 50.
- Title Assignment: The KD-BT11 allows you to assign titles to 30 AM/FM station frequencies using a maximum of 8 characters for each title.
- Direct Track Access: You can directly access CD tracks 1-12 by pressing the station preset buttons. If a preset button is pressed for less than 1 second, the track corresponding to the number on the preset button is selected (for tracks 1-6). When a preset button is pressed for more than 1 second, the track corresponding to the number above the preset button is accessed (for tracks 7-12).
- Preamp Output Mode: In the PSM menu, you can set the rear preamp outputs for connecting rear speakers (through an external amplifier) or for connecting a subwoofer (through an external amplifier). When set for rear speakers, the rear outputs operate with the unit's fader control. When set for subwoofer, the outputs are non-fading, and you can set the cutoff frequency of the low pass filter at 90Hz, 135Hz, or 180Hz. The subwoofer level can be set between 0 and 8. You can also adjust the phase of the subwoofer preamp output to 180-degrees or 0-degrees.
- Source Level: You can adjust the volume level of each source (except FM), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source. You can adjust the volume level of each source from -5 to+5.
- Front Panel Auxiliary Input: A front panel stereo minijack is provided to allow the connection of a portable audio source. Just connect your portable cassette, MD or MP3 player to this unit, and you can listen to the audio from the portable player through the speakers in your mobile audio system.
- Compatibility with Optional Input Adapter: An optional JVC Line Input Adapter (item # 105KSU57) or Aux Input Adapter (item # 105KSU58) may be used to provide an auxiliary input on this unit. This feature allows you to connect a portable audio player, such as a portable MP3 player, to this unit as an additional audio source. The adapter connects to the CD changer input on this unit. When the adapter is connected to this unit, a CD changer cannot be connected.
- Clock Display: While playing a CD, you can switch between the clock display and the CD elapsed time display (the track number always appears). When you press the Display button during power off, the unit will turn on, display the clock for 5 seconds, then shut off. This can be done with the ignition on or off. In the PSM menu, the clock can be set to display with the unit on or off, only turning off when the ignition is turned off ("keyed" operation).
- Display/Button Illumination Dimmer: The display and button illumination dimmer can be set to Off (normal brightness at all times), On (display and button illumination is always dimmed) or Auto (dims the display and button illumination when you turn on the vehicle's headlights).
- Disc Protection: If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (Disc will not play this time until you close the fold-down face)
- Disc Resume: If you change the source, playback also stops (without ejecting the disc). Next time you select CD for the playback source, the disc will start from where it has been stopped previously.
- Detachable Face: The unit features a detachable face to deter theft and comes supplied with a hard plastic face case.
- Wireless Remote Control: The KD-BT11 comes supplied with a wireless remote control (RM-RK50). The remote contains Power, Attenuator, Sound, Source, Tracking and Volume functions.
- Built-In Bluetooth
- Built-In Bluetooth Wireless Technology: The JVC KD-BT11 supports the following Bluetooth Profiles - HFP (Hands-Free Profile), A2DP (Advanced Audi Distribution Profile), AVRCP (Audio/Video Remote Control Profile), and OPP (Object Push Profile). Bluetooth is a short-range wireless radio communication technology for mobile devices such as your cell-phone. Bluetooth devices can be connected without cables for communication between each other. The JVC KD-BT11 features a built-in Bluetooth receiver along with a built-in microphone which allows you to make and receive cellular phone calls through your Bluetooth enabled phone, or listen to a Bluetooth audio device via the KD-BT11's controls and your vehicle's audio system. You can register up to 5 Bluetooth devices to this unit, however, only one unit of each type can be used at a time. You can operate the following Bluetooth features through this unit.
- Making a call: You can make a call by entering a phone number from your JVC receiver's Dial Menu.
- Calling from phonebook: You can call a number from the phone-book in your connected cellular phone using your JVC head-unit; before using this function, transfer the phone-book memory of your cellular phone to this unit.
- Calling by voice command: If your cellular phone is equipped with the voice recognition system, you can make a call by your voice using the supplied microphone.
- Calling from call histories: The head-unit has three kinds of call histories - redial, missed calls, and received calls. You can make a call using these call histories through your JVC head-unit.
- Call Waiting: If your cellular phone is equipped with the call waiting function, you can put the current call on hold and answer the waiting call.
- Calling by preset numbers: You can preset up to six phone numbers for one touch dialing from your JVC receiver.
- Receiving the SMS (Short Message Service)/Text Message: If your cellular phone can use SMS and Text Message, you can read the message on the display of the receiver.
- Playback Bluetooth Audio: The built-in Bluetooth receiver also allows your JVC head-unit to playback audio wirelessly from your Bluetooth compatible portable audio player and operate the following playback options of your Bluetooth compatible portable audio player - Start Playback, Pause, Forward Skip, Reverse Skip and Stop.
- Compatible Bluetooth Enabled Mobile Phones:
- Apple: iPhone (HFP only)
- BenQ/Siemens: SL75
- Blackberry: 8700
- Grundig: M130b
- Motorola: E680i, KRZR K1, L6, SLVR L7, V3, V3x
- Nokia: 5300, 6021, 6233, 8800, 8800 Sirocco, N70, N80, N91
- 02: XDA Atom
- Sagem: my301X, my700X,
- Samsung: SGH-D528, SGH-D600e, SGH-E870, SGH-i750, SGH-X820, SGH-Z500, SGH-Z710
- Sony Ericsson: K750i, K800i, M600
- External Device Controls
- Optional Interface Adapter for iPod: The optional JVC KS-PD100 iPod adapter (sold separately) allows an iPod portable digital music player with a dock connector to be hooked up to and controlled by the KD-BT11 CD receiver. While connected the KD-BT11 will display the following: CD Text, MP3 folder/file names, or ID3 Tag information. All the iPod buttons will be disabled when connected to this adapter and the iPod will be controlled from the JVC receiver. With this interface, you'll be able to play your iPod music files through your JVC receiver and have all the titling information appear on the JVC's display. Your iPod is also charged while it is connected to the KD-BT11 through the KS-PD100 iPod adapter. When this interface is connected to the JVC receiver, you cannot connect a CD changer. The adapter is made for audio file playback only, so it won't pass video signals from video capable iPods.
- Note: The KS-PD100 is compatible with most iPods that have a dock connector, including the following models: iPod with dock connector (software version 2.3), iPod with Click Wheel (software version 3.1), iPod mini (software version 1.4), iPod photo (5th generation - software version 1.2), iPod nano (1st, 2nd, 3rd generation) and iPod classic. The KS-PD100 is not compatible with the Apple touch or iPhone.
- Satellite Radio: This unit supports both XM and Sirius Satellite Radio when used with the optional Satellite Radio tuner and adapter (sold separately). The KD-BT11 supports the Sirius Connect Universal Vehicle tuner and JVC KS-SRA100 Sirius Satellite Radio interface (700SIRJVC1, sold separately). Currently there is no XM adapter available for this unit. You can also connect a Satellite Radio Plug-and-Play tuner to the unit's front-panel Auxiliary input.
- HD Radio: The KD-BT11 supports HD Radio when the optional JVC HD Radio tuner box (KT-HD300, sold separately) is connected to the receiver's CD changer port on the rear of the unit. HD Radio Technology can deliver high-quality digital sound. AM digital will have FM-like quality in stereo, while FM digital will have CD-like quality with static free and clear reception. In addition, AM/FM digital stations can offer text and data such as artist names and song titles. Many HD Radio stations also offer more than one channel of programming. This service is called multicasting. To find HD Radio stations in your area, visit www.hdradio.com. When this optional HD Radio tuner box is connected to the KD-G340, you will still be able to receive conventional analog AM/FM broadcasts.
- Changer Controls: This unit is equipped with JVC's "J-Link" CD changer control system. It is fully compatible with JVC's CD/MP3 changer (item # 257CHX1500). Other JVC CH-X series CD changers (except CH-X99 and CH-X100) can be controlled directly by this head unit, however, they are not compatible with MP3 discs. You cannot use the KD-MK series CD changers with this unit, even with an adapter.
|
|
|
 |
|
 |
|
|
|
