 |
 |
 |
|
BELTRONICS STIR STI-R PRO STI REMOTE RADAR
The Beltronics STi-R Radar Detector is the highest performing remote radar detector I have ever tested! (1stRadarDetectors.com Owner and Countermeasures Expert John Turner) The Bel STi-R radar detector can be hidden behind the grille, or for much better performance and no installation cost, hide it up on your passenger visor with our RADAR DETECTOR VISOR HOLDER. The Beltronics STi-R is the only remote radar detector offering Ka Segmented Programming, giving you detection of all radar frequencies today; as well as any new Ka radar guns produced in the future. Technical advancements like this are why Beltronics is the Leading Edge manufacturer of radar detectors. The Bel STi-R radar detector is 100% invisible to all VG-2, VG-4, Spectre II, Spectre III, Spectre IV radar detectors, and Stalcar radar detector detectors used in Australia and New Zealand.
Until now, all remote radar detectors were installed down in the grille, outside the vehicle. But now you can use our exclusive Radar Detector Visor Holder and get the very best radar detection performance by moving the STi-R from the grille to your passenger visor. You can easily hide the #1 remote radar detector on the passenger visor, run the cables around the windshield. Use voice alerts of the Beltronics STi-R or audio and display alert. Get the best STi-R radar detection performance for Canada, Europe and the USA, get Ka Segmented Programming and get 100% RDD invisibility. No other radar detector can provide this level of performance. And our Remote Radar Detector Holder makes installation easy for almost anybody, increases the radar detection performance, saving you major installation costs!
Are you located outside the USA? Combine the Bel STi-R Remote Radar Detector with the GPS Mirror with photo speed trap alerts for the best international protection. Combine the K, Ka superwide, Ka Narrowband and POP3 radar detection of the Beltronics STi-R Remote Radar Detector with the outstanding photo speed trap and red light intersection camera alerts of the Cheetah GPS Mirror. This PRS5-STiR Prowler Remote combo system includes a $40 discount off the GPS Mirror. Select the International Bel STiR button above.
The standard Beltronics STi-R remote radar detector is used in America, while the International PRS5-STiR is the finest combo Euro detecteur de radar + Photo GPS alerts. Here is why the Bel STi-R radar detector is the very BEST RADAR DETECTOR in the WORLD:
1) Only remote radar detector with 2 front antennas to increase signal sensitivity while minimizing false alerts;
2) Only radar detector with SEGMENTED KA Programming for desired Ka radar frequency used anywhere around the world; and allows K, X and Laser to be turned on/off as desired;
3) 100% invisible to all RDD in Asia, Australia, France, Italy, Canada, Virginia; such as VG2, VG4, Spectre II, Spectre III, Spectre IV RDD and Stalcar Radar Detector Detectors;
4) Best Remote for detecting "Instant On" and Ka police radar with 10 mile detection distance;
5) Best at detecting over-the-hill, hidden police radar speed traps;
6) Superb voice alerts on radar, laser and safety warnings (SWS), plus audio alerts;
7) Compact, watertight package for installation on the ski rack, luggage rack, behind the grille, behind a bumper;
8) Fewest false radar alerts of any remote radar detector;
9) Easy to program for X off, city X, K, City K, Ka Superwide, police laser, POP3 radar;
10) Easy to program for Euro K, Euro Ka Narrowband police photo radar; can be programmed for any new Ka frequency in the future -making the Bel STi-R Radar Detector a 5 Star+ rated remote radar detector, detecteurs de radar
Remote mounted with cockpit voice alerts, cockpit controls and red matrix LED Display.
MAJOR FEATURES
Bel STi-R Radar Detector provides Dual LNA (low noise amplifier) receivers to offer the longest distance warning against all radar threats and reduces false alerts to minimum
TotalShield RF Technology is 100% invisible to all police RDD, VG-2, VG-4, Spectre II, Spectre III, Spectre IV RDD, Stalcar used in USA, Canada, Australia, France, Italy, Germany, Europe
Detects Standard Radar Bands: X, K, Ka Superwide, POP3, Laser
Detecteurs de Radar, Euro Radar Bands: Euro K, Ka Narrowband, Ka Superwide, POP3 radar and Laser
High and low voltage warning is given any time the vehicle’s voltage drops below 10.5 volts, or goes above 16.5 volts
Easy-to-use Programming lets you customize up to 7 features
Exclusive AutoScan mode intelligently reduces unwanted false alarms
Ultra-bright text-display provides easy to read information from any angle
Tech Display provides actual numeric radar frequency for any radar signal
Programmable On/Off on all radar and laser bands
Detects and decodes up to 64 Safety Warning System messages |
|
|
|
|
|
 |
|
 |
|
Features
- The Beltronics STi-R remote-mount radar detector offers the same invisibility from detection as the revolutionary STi Driver, while it adds better defenses against laser and several radar bands. Drive with peace of mind as this powerful stealth detector works for you.
- The STi-R package includes a radar/laser receiver, connection interface, control module, display unit, and an amplified external speaker. TotalShield™ technology renders the Sti-R completely undetectable by the latest devices, including VG-2 and Spectre. The compact connection interface stows out of the way, providing a central wiring point for all the various components.
- Read More
- You can see the STi-R's display unit from any angle, and the built-in photocell light sensor adjusts the brightness of the screen to the ambient light in your vehicle's interior. The red alphanumeric display keeps you informed, while full dark mode adds another layer of stealth. The compact control module offers quick adjustments for power, volume/mute, and band sensitivity, and you can use it to program seven different features, including brightness and signal strength. The external amplified speaker provides audible alert tones and speaks digital voice warnings clearly over road noise.
- Beltronics packs plenty of advance warning technology into this convenient package. Two forward-looking antennas protect you against X-, K-, and Ka-band radar, including "POP" Ka-band instant-on radar. You can turn detection for ten different frequencies within the Ka-band on or off, providing more efficient protection. Five forward-facing optical laser sensors sweep at longer range than windshield-mounted detectors. Patented AutoScan™ processing practically eliminates false alarms. The STi-R also offers high- and low-voltage warnings for your vehicle's battery.
- Beltronics recommends professional installation of the STi-R to ensure optimum performance and safety.
- Sorry, but we cannot ship radar detectors to Virginia or the District of Columbia.
- Details:
- Features:
- remote-mount radar/laser detector
- package includes radar/laser receiver, connection interface, control module, display unit, and external amplified speaker
- Protection:
- digital voice and audio tone alerts for radar, laser, POP, VG-2 and Spectre
- selectable Ka-band frequency detection
- 360° laser protection
- 7 programmable features
- 280 LED alphanumeric display
- voltage meter display
- 2 city modes, plus highway mode
- complete invisibility from detection, including VG-2 and Spectre
- Specifications:
- radar/laser receiver: 3-11/16"W x 1-1/4"H x 4-1/8"D; display unit: 2"W x 11/16"H x 11/16"D; control module: 2"W x 7/16"H x 11/16" D; speaker: 2-1/4"W x 2-1/8"W x 2-1/4"D
- warranty: 1 year
- Features
- Stealth-installed Remote Detector: The Beltronics STi-R is a custom-installed digital radar, laser, and safety detector. The radar/laser receiver is designed to be installed under the hood of the vehicle, with a dash-mounted control panel, concealed LED display, and an amplified speaker that is loud enough that it can be hidden behind the dash. The system is tied together by a hideaway interface. Professional installation is highly recommended.
- TotalShield Technology: The STi-R is equipped with TotalShield technology, which makes the unit 100% undetectable to any radar detector detectors. Not only is the detector immune to VG-2 radar detector detectors (RDD), it can not be detected by the newer RDD called Spectre.
- Detection Capability: The STi-R includes full X, K, SuperWide Ka, and Safety Warning System radar capability, laser detection, and digital signal processing for superior range and fewer false alarms. You can program the unit to enable all bands at once or you can select one or more bands to turn off (once you have determined there are no traffic radar units using the disabled bands in your area). If Ka SuperWide is turned off, you can turn on or off each Ka segment (Ka 1 through Ka 10).
- Pop Mode Detection: The STi-R includes protection against "Pop Mode" radar, a relatively new feature for radar gun manufacturers. It works by transmitting an extremely short burst, within the allocated band, to identify speeding vehicles in traffic. Once the target is identified, or "popped", the gun is then turned to its normal operating mode to provide a vehicle tracking history.
- Radar/Laser Receiver: The system's Radar/Laser receiver is equipped with a dual LNA Microwave receiver, a Superheterodyne, Varactor-tuned VCO, a Scanning Frequency Discriminator, and Digital Signal Processing. For Laser detection, the unit features a quantum limited video receiver with 5 optical Laser sensors. Typically, the receiver is mounted under the bumper, or inside the front grille of the vehicle. For best performance, it should be mounted horizontally, with a clear "view" of the road. Dimensions: W=3.675", H=1.207", D=4.125"
- Control Module: The STi-R's control module is designed to be mounted within easy reach of the driver's seat. It can be surface-mounted using the two-sided adhesive strip. The control module has a power-on LED, a Power button, Volume/Mute, and Sensitivity button. To program the unit, you can press the Sensitivity and the Volume/Mute buttons together. Dimensions: W=1.95", H=0.651", D=0.563"
- LED Display: The STi-R's display is designed to be surface-mounted or installed in a cutout in the dash. A red lens is included to conceal the display module in the dash. The display consists of 280 individual LEDs to provide an intuitive ultra-bright display of signal strength and text messages. It will show "Highway," "AutoScan," or "City NoX", or a single letter, as its power-on indication. During an alert, the display will indicate the radar or laser band, and a precise bar graph of signal strength. Dimensions: W=1.958", H=0.656", D=0.703"
- Optional Concealed Display: A single LED can be installed to alert you to radar or laser detection. To install the supplied LED, a 1/4" hole is required for the LED clip.
- Amplified Speaker: The STi-R comes with an amplified speaker for the audible and voice alerts. It can be mounted in plain view, or can be mounted behind the dash or another out-of-sight location. Installation requires connecting the speaker to a switched +12V power source and ground, plus the audio signal cable needs to be plugged into the system interface. Dimensions (w/o brackets): W=2.264", H=2.274", D=2.147"
- Voice Alerts: In addition to visual alerts, the unit features digital voice announcements. If you prefer, you can turn off the voice alerts and have the unit provide audible tone alerts.
- AutoMute: The patented AutoMute feature will reduce the volume to a lower level after a radar encounter at the selected volume. This keeps you informed without the annoyance of a continuous full-volume alert. AutoMute can be turned off, if desired. You can silence the audio for a single specific signal by briefly pressing the Volume/Mute button on the control panel. After the radar encounter has passed, the mute will automatically reset and will alert you to the next encounter.
- Brightness Modes: The STi-R has three display brightness settings, plus an Automatic Mode and Dark Mode. In the program mode, you can cycle through the Brightness Modes: Auto, Maximum, Medium, Minimum, and Dark. When Automatic is selected, the brightness is controlled by a sensor that measures the ambient light in the vehicle. In the Dark Mode, the display will be totally dark, and only audible alerts are used when the STi-R detects signals.
- Programming: There are 7 user-selectable options to allow you to customize the STi-R to your own preferences. The programmable categories include Pilot (Power-on Indicator), Voice Alerts, Power-on Sequence, Signal Strength Meter, AutoMute, Brightness, and Radar/Laser Bands.
- Pilot (Power-on Indicator): The Power-on indicator can be a full word ("Highway") or a single letter ("H").
- Power-on Sequence: When the STi-R is first turned on, the standard power-on sequence includes a series of displays followed by a brief X-band alert. If any bands have been disabled, a double X-band alert and corresponding message will alert you that one or more bands have been turned off. If you desire a quicker power-on sequence, you can switch to "Fast Power-On" which provides only a single X-band alert if all bands are enabled, and a double X-band alert and a corresponding message if any bands have been turned off.
- Signal Strength Meter: The STi-R's standard bar-graph signal strength meter only displays information on a single radar signal. If there are multiple signals present, the detector's internal computer determines which is the most important threat to show on the bar-graph meter.
- Threat Display: The Threat Display option is an advanced display for experienced detector users. The Threat Display simultaneously tracks multiple radar signals and their relative signal strength. It displays what band each signal is and a numerical reading of its signal strength.
- Tech Display: The Tech Display option is for experienced detector users. It displays the band and the actual numeric frequency of the radar signal being received.
- Vehicle Voltage: When the vehicle's battery voltage falls below 10.5 volts or rises above 16.5 volts, the detector will give you a low voltage or high voltage warning and sound an audible alert.
- City Mode Sensitivity: The detector's City Mode significantly reduces X-band sensitivity to reduce annoyance from X-band intrusion alarms and motion sensors. In addition to the Standard City Mode, you can further reduce X-band sensitivity by selecting "City Mode/Low X". If you are absolutely certain there are no X-band traffic radar units in the area, you can select "City Mode/No X" and the detector will not respond to any X-band signals.
- Safety Warning System: The Safety Warning System, or SWS, uses a modified K-band radar signal to alert you of upcoming highway construction, road hazards, weather-related hazards, travel and convenience information and emergency/slow-moving vehicles. The SWS system has 64 possible text messages that can be displayed on the STi-R.
|
|
|
 |
|
 |
|
|
|
